Logged in as

Infrastructure

Elvaco's Infrastructure segment is made up of products that enable collection, processing and delivery of meter data. Our M-Bus Gateways are used to read meters and deliver meter data in a suitable format to a receiving system. M-Bus Masters extends the number of meters a Gateway is able to use and Wireless M-Bus Receivers enables the Gateway to communicate with Wireless M-Bus meters. Elvaco also offers turn-key solutions, which are assembled, connected and ready to start using at delivery. 

CMe3000 - M-Bus Gateway for Fixed Network

CMe3000 is a cost-effective M-Bus Gateway for Fixed Network which acts as a communication tunnel for M-Bus meters and enables them to communicate with a receiving system. The product is equipped with an IR interface which enables it to communicate with other devices from Elvaco's CMe/CMeX Series as well as ABB electricity meters without using any cables. It is also compatible with all other meters using the M-Bus protocol. Through its integrated web interface, CMe3000 can be configured and updated remotely without having to visit its installation site.

Mechanics

Casing material:
Polyamide
Protection class:
IP20
Dimensions (w x h x d):
35 x 90 x 65 mm (2 DIN modules)
Mounting:
Mounted on DIN rail (DIN 50022) 35 mm
Weight:
100 g

Electrical connections

Supply voltage:
Screw terminal. Cable 0.75-2.5 mm², 0.5 Nm tightening torque
M-Bus master port:
Pin terminal. Solid wire 0.6-0.8 Ø mm
Network:
RJ45 (Ethernet)

Electrical characteristics

Nominal voltage:
100-240 VAC (±10%)
Frequency:
50/60 Hz
Power consumption (max):
<2.5 W
Power consumption (nom):
<1 W
Installation category:
CAT 3

Environmental specifications

Operating temperature:
-20 °C to +55 °C
Operating humidity:
5 % to 90 %, non-condensing
Operating altitude:
0-2000 m
Usage environment:
Indoors, can be extended with IP67 enclosure for outdoor use
Storage temperature:
-40 °C to +85 °C

Temperature sensor, margin of error

Humidity sensor, margin of error

User interface

Green LED:
Power
Red LED:
Error
Yellow LED:
Status Ethernet
Push button:
Factory reset
Configuration:
Web interface (HTTP)

M-Bus

Interfaces:
IR, integrated M-Bus Master
M-Bus standard:
EN 13757
Transparent M-Bus:
TCP/IP (software limit does not apply to Transparent M-Bus mode)
Decryption:
No

Wireless M-Bus

Integrated M-Bus Master

Nominal voltage, master port:
28 VDC
M-Bus baud rate, master port:
300 and 2400 bit/s
M-Bus search modes:
Primary, secondary
Maximum cable length:
1000 m (100 nF/km, maximum 90 ohm)

Wireless M-Bus Receiver

M-Bus slave interface

General

Software/firmware update:
Web interface

Data storage (examples)

Mobile Network

Fixed Network (Ethernet)

Speed and duplex:
Auto 10/100 MBit half/full duplex

Integration

Approvals

EMC:
EN 61000-6-2, EN 61000-6-3
Safety:
EN 61010-1, CAT 3

Connections and Interfaces

Transmissions

For downloads, please visit our support site at: https://support.elvaco.com

Our website has gathered all resources you need to update, tune and troubleshoot your installations, such as:

  • Latest software versions
  • FAQs
  • Guides
  • In-depth technical information
  • Support forum

By continuing to use the site, you agree to the use of cookies. Learn more about our Privacy policy and Cookie policy.