Atención al cliente

Ofertas de empleo

Job opportunities at Elvaco

Elvaco is a growing company with talented, down-to-earth people who want to deliver that little extra while at the same time having fun!

 

Apply now!

CMi-Box Receiver

CMi-Box Receiver

The CMi-Box Receiver is a powerful wireless M-Bus receiver, which is housed in a ready-to-install polycarbonate casing. When used in combination with an Elvaco CMe gateway, it processes meter data for electricity, water, gas and heating, using radio technology to handle up to 800 wireless M-Bus meters that are connected to it.

CMi-Box Wireless M-Bus Receiver

Esta CMi-Box se compone de un receptor M-Bus inalámbrico montado en una carcasa protectora. El producto se puede utilizar con una pasarela de la serie CMe de Elvaco para permitir la comunicación con los medidores M-Bus inalámbricos. CMi-Box gestiona hasta 800 medidores, cada uno protegido por claves de encriptación individuales.

  • Total: 8
  • Total: 8

Mecanicos

Clase de protección:
IP54
Dimensiones (anchura x altura x profundidad):
141 x 157 x 44 mm
Material del revestimiento:
Policarbonato
Weight:
445 g
Montaje:
Montaje en pared con soportes

Conexiones eléctricas

Tensión de alimentación:
Fuente de alimentación de 230  Cable de 3 m incluido, fuente de alimentación de 24  Conector push PCB
Puerto esclavo M-Bus:
Terminal roscado. Cable de 0,5-2,5 mm², par de apriete de 0,5 Nm

Características electricas

Tensión nominal:
Fuente de alimentación de 230  100-240 VCA, fuente de alimentación de 24  12-35 VCA o 12-48 VCC
Frecuencia:
50/60 Hz
Consumo de energía (nom.):
<0,2 W
Categoría de instalación:
CAT 2
Unidades de carga:
1T/1,5 mA

Especificaciones ambientales

Temperatura de funcionamiento:
De -30 °C a +55 °C
Humedad de funcionamiento:
Del 5 % al 90 %, sin condensación
Grado de contaminación:
Grado 2
Entorno de uso:
En interiores
Temperatura de almacenamiento:
De -40 °C a +85 °C

Sensor de temperatura, margen de error

Sensor de humedad, margen de error

Interfaz de usuario

M-Bus

Interfaces:
Receptor M-Bus inalámbrico, M-Bus esclavo
Estándar M-Bus:
EN 13757 y EN 13757-4
Desencriptación:

Wireless M-Bus

Maestro M-Bus integrado

Receptores inalámbricos M-Bus

Modos:
S1, T1, C1
Número máximo de dispositivos M-Bus inalámbricos:
800
Radio frequency band:
868 MHz
Encriptación, M-Bus inalámbrico:
AES-128
RF sensitivity:
-105 dBm
Compatible con OMS:

Interfaz esclava M-Bus

Velocidad de transmisión de M-Bus, puerto esclavo:
300 y 2400 bit/s
Tensión nominal, puerto esclavo:
21-42 VCC
Modos de direccionamiento:
Primario, secundario
Dirección por defecto:
251

General

Almacenamiento de datos (ejemplos)

Red móvil

Red fija (Ethernet)

Integración

Aprobaciones

EMC:
EN 61000-6-2, EN 61000-6-3
Seguridad:
EN 61010-1, CAT 2

Connections and Interfaces

Transmissions

Elvaco’s powerful CMi-Box Receiver can read data from up to 800 wireless M-Bus meters within the remote meter reading infrastructure. The device uses a radio signal that does not require cables to be laid for remote meter reading. This greatly simplifies the installation process, reducing installation time and costs. 

The CMi-Box Receiver works in conjunction with a gateway from Elvaco’s CMe series, such as the CMe2100 or CMe3100model. This combination makes it possible to process the recipient’s data. The security of the transmitted meter data is guaranteed thanks to individual encryption keys. 

The wireless M-Bus Receiver is housed in a high-quality, durable casing made of polycarbonate. This is permanently mounted on the wall in the desired position. Interfaces to a wireless M-Bus receiver and the M-Bus meters enable flawless device communication in the metering infrastructure.

Numerous product variants with different voltage and antenna options ensure that you always have the right CMi-Box Receiver solution for your individual use case.